| 679 | 41 | 7 |
| 下载次数 | 被引频次 | 阅读次数 |
通过测量在不同空气/水流量、不同安装角度下,插孔式分流器、圆锥式分流器、反射式分流器各出口液相流体的流量,得到两相流体流量、安装角度对分流器性能的影响。插孔式分流器的分流性能受安装角度影响很大,适宜垂直安装;在垂直安装时,其性能随着流量的增加而变差,适合低流量的空调器。圆锥式分流器的分流性能受安装角度影响较小,在30°安装时,性能最佳;其性能随流量的增加变好,适合高流量的空调器。反射式分流器的分流性能受安装角度的影响较小;在倾斜安装时,其性能随流量的增加而变差,适合低流量的空调器。
Abstract：The liquid flow rate at the outlet of jack-type distributor,cone-type distributor and reflect-type distributor was measured under test conditions of different air/water flow rates and different installation angles,and the influences of two-phase flow rate and installation angle on diffluence performance were analyzed.For the jack-type distributor,the diffluence performance is greatly affected by the installation angle.When the jack-type distributor is installed vertically,the diffluence performance reaches the best,and it becomes worse as the flow rate increases,which means jack-type distributor is suitable for air conditioner with low refrigerant flow rate.For the cone-type distributor,diffluence performance is little affected by the installation angle,and it reaches the best when the installation angle is 30°.The performance becomes better as the flow rate increases,which means cone-type distributor is suitable for air conditioner with high refrigerant flow rate.For the reflect-type distributor,diffluence performance is little affected by the installation angle,and the performance becomes worse as the flow rate increases under the condition of oblique installation,which means reflect-type distributor is suitable for air conditioner with low refrigerant flow rate.
[1]Wu,W.,Ding,G.L.,Zheng,Y.X.,et al.Principle of designing fin-and-tube heat exchanger with smaller tube for air conditioner[C].14thInternational Refrigeration and Air Conditioning Conference at Purdue,July 16-19,2012,West Lafayette,Indiana,USA.
[2]李泽芳,苏庆勇.单元式空调机节流毛细管分液头的改进与实验[J].装备制造技术,2008,3:18-19.
[3]高晶丹,丁国良,陈国胜,等.插孔式分流器分流性能的实验研究[J].制冷技术,2013,33(2):6-9.
[4]GB/T 7725-2004.房间空气调节器[S].北京:中国标准出版社,2004.
[5]董续君,黄辉,张桃,等.空调器中制冷剂分流器及其组件的性能研究[C].//制冷空调新技术进展.2005:414-419.
基本信息:
中图分类号:TB657.5
引用信息:
[1]高晶丹,丁国良,胡海涛,等.不同结构分流器的分流性能比较[J].制冷技术,2013,33(03):24-26+30.
2013-10-30
2013-10-30
2013-10-30